Andrew Zajac Embossing Tool

Model: andrew-zahac-embosssing

£29.99

Quick Buy with PayPal

Order before 2:30pm tomorrow for dispatch tomorrow!

0% Sales Tax for all US States

0% Sales Tax for all US States

Product Description

Andrew Zajac Embossing Tool - (New version 2021-06!) This tool is made from tempered high-carbon steel and both tips are finished by hand. The tips are carefully sharpened to the correct specification to allow it to emboss the slot effectively without shredding or otherwise damaging the slot. I ensure that each tip is perfect. Embossing increases the efficiency of the reed as it goes through the slot. By using a tool to press down onto the edges of the slot, a small ridge of metal is created in the slot. This ridge decreases the space between the reed and the slot. The closer tolerance will cause the reed to make more sound and require less breath force to activate. To benefit most from embossing, you need to emboss the entire slot. For a quick shortcut, see these instructions on only embossing half of the slot. Full-length slot embossing can be easy! The embossing tool is effective on stainless steel as well as brass reed plates. I recommend using a mineral oil when using this tool. If you over-emboss a slot, the presence of oil also speeds up the process of plinking and clearing away burs. The tool is made small because embossing is more about precision than force. Apply pressure with your fingers instead of the weight of your arm and you will save time and have a lot of success. The tool can be groomed with some fine sandpaper once in a while to keep it in working order for a very long time - at least several hundred harps. You won't have to worry about wearing it out.

Fast shipping to all US states
30 day money back guarantee
Super Fast Delivery
Fast Delivery with FedEx

Comprehensive range of harps, sent out promptly. My first point of call when looking for a new/different harp.

Google ReviewDave MoffatReviewed 06/11/2023

Excellent customer service! My recent purchase required a couple of alterations in details and they were very responsive about it. Despite the changes in the order, the item actually arrived earlier than expected!

Google ReviewKaiomurz MotawaraReviewed 01/11/2018

Always a great experience dealing with this firm; keen prices, fast delivery and well packaged.

Google ReviewRichard HonourReviewed 07/11/2023

You may also like...

Andrew Zajac Extended French Tuner

Andrew Zajac Extended French Tuner

£25.99
Andrew Zajac Extended French Tuner - You don't need bulky, expensive and complicated equipment to tune your harmonica with great precision. The French Tuner™ helps you use your mouth and ears to quickly tune the blow reed plate of a diatonic harmonica. The French Tuner™ helps you eliminate beating and provide smooth chords. Perfect tuning can only be achieved with both reed plates are attached to the comb and with a lot of attention to detail. But for most players, the French Tuner™ provides excellent results after just one pass. It's the quickest and easiest way to improve the tuning of the blow plate. Its precision design allows the French Tuner to work on all major brands of 10-hole diatonic harmonicas including Seydel (which have wider spaced holes) and many 12-hole harps. It will not fit the larger Hohner 364 and 365 harmonicas but contact me if you are interested in a French Tuner that is custom made to fit these harmonicas. The French Tuner is not just for tuning! Use it to speed up other important tweaks: - Use the French Tuner to help adjust reed profiles. The French Tuner will isolate a reed while the plate is off the comb and allow you to play the reed to assess and make fine-grained changes to reed shape. Pucker or tongue-block embouchure can be used to best help you adjust your reeds to your playing style. - The French Tuner will help you with embossing. If you are a player who doesn't like the sound of a tightly embossed harmonica, make fine-grained adjustments to the slot while using your ears. Gradually emboss the slot until you reach the sweet spot where you get maximum responsiveness without making the tone too bright. - The French Tuner is perfectly flat and can be used as a reference to improve air seal. Use the French Tuner and a source of bright light to look for uneven areas of the blow reed plate.... Read more
View details
Andrew Zajac Flatness Tool and Reed Plate Claws

Andrew Zajac Flatness Tool and Reed Plate Claws

£45.99
Andrew Zajac Flatness Tool and Reed Plate Claws - Use these tools to flatten the comb and reed plates. Straight, flat reed plates fitted to a flat comb are the best framework for the reeds. Even a thousandth of an inch of space between the comb and reed plate means the reed will be less efficient at converting air flow into decibels. With a good frame, the reeds can function the way they are supposed to. Want even more power? A good frame also means reed work becomes much simpler because all sides of the slot are at the same level and are well supported. A good foundation is mandatory for best results when doing reed work. The Flatness Tool™ is used to measure flatness. It is an extremely precise straight edge reference. It has a reed groove so that it can be used on both reed plates as well as the comb. One you find where the comb or the reed plate is not flat, you can correct it. The Flatness Tool™ can also be used to make combs extremely flat. My method of flattening combs is very easy to learn with a little practice. There is no guesswork involved since you are using a proper reference as your guide. My Dark combs are the flattest combs on the market. Use this tool to make any other sandwich-type comb just as flat as mine. Use the Reed Plate Claws™ on both the blow and draw reed plates. Straighten the draw plate before flat sanding it. On the blow plate, the reeds get in the way of flat sanding so all you need to do is straighten them using the reed plate claws. You may use the edge of a reed plate to check the flatness of the other plate. However, I do not recommend using a reed plate to gauge the flatness of a comb. You will likely get false measurements which will lead to over-sanding the comb as you try to correct what you believe is a defect. It's not easy to undo oversanding - this type of feedback loop can be fatal. The Reed Plate Holder will help you hold the reed plate steady as you straighten it with the Reed Plate Claws. Once you get comfortable with the claws, you may no longer need the Reed Plate Holder. It has two slots to accommodate many different sizes of reed plates. Use the smallest slot that fits. The Reed Plate Holder ships with a sticker on the under side. The adhesive will help hold the plate in place. Once it loses its stickiness, you can peel it off and replace it with any kind of tape you have on hand. If you no longer need the additional help from the adhesive, don't bother replacing it.... Read more
View details
Andrew Zajac Customisation and Repair Videos on USB

Andrew Zajac Customisation and Repair Videos on USB

£41.99
Version 3 includes over 9 hours worth of videos of which 2 hours and 30 minutes are Premium videos. Premium videos go into unprecedented details and show you topics that have never been shown before. Learn to repair, upgrade or customize your own harmonicas to make each one of them a high-quality instrument. A well-playing harmonica is a joy to play. Many harmonicas require a lot of effort to play and it makes you feel like you are fighting with the instrument. That can leave you questioning your skills or thinking about giving up. There is no reason playing harmonica should feel like work - it should be FUN! On my USB drive you will find over 30 of my best YouTube videos teaching most customization and repair topics. In addition to those popular videos, I created 15 new Premium videos that are only available on this USB drive. These videos go into unprecedented details and have best video and sound quality. I show you topics that have never been shown before. All videos are organised and come with 50 pages of printed documents to which you can refer as you watch the videos. Charts and checklists are included. For those who want to spend as little time as possible working on their harps, I have a Quick-and-Dirty section which includes useful instructions on how to get surprisingly effective results FAST! - The "Silver Bullet": how to make up to 90 per cent of harmonicas from the factory play louder, bend easier and have better tone. - Five Minute Reed Work: What do you do when gapping doesn't work? You fix the reeds. Here's how. - Gapping strategy: Here's how I gap any harp to get the same results every time. - Tuning repair: Spend less time tuning by zeroing-in on the problem notes. Support and updates: With the purchase of these videos you get email support: Ask me anything! I'm not done! I will continue to make new videos. I will also provide a method for you to get updates and access new videos as I make them.    ... Read more
View details
Save 5% today
Sign up and save!

SAVE

5%

Save 5% on your first order by signing up.

No thanks, I'll pay full price

Save 5% on your first order by using code:

COPY

Please wait...

Chat via WhatsApp Chat via WhatsApp now